3000
SERIES
3000 SERIES GarmatĘ USA 3000 Series are full downdraft,
double wall insulated paint booths. The 3000 cabins
are ETL listed, as are the Garmat mechanicals and
electrical control panels. The 3000 cabins are standard
27' length, with 10' wide tri-fold vehicle entry
doors, 4 tube interior accessible light fixtures,
three-row center pit and if drive-in/back-out configuration,
a side service door is included. Additional options
include, above ground basement, booth extension,
drive-thru doors and rear wall light package.
3000 CABIN ASSEMBLY Lengths: Standard 27', Optional
24' or 30' The cabin is constructed of durable powder
coated, fully insulated solid interlocking wall
panels. The panels are designed to prevent heat
loss into the surrounding shop and for greater efficiency
during the bake cycle. Both the wall and roof panels
are insulated for high temperature curing and quieter
operation.
3000 DOORS Entrance: Rubber sealed doors with heavy
duty hinges. If booth is a drive-in/back-out configuration,
there is a service door supplied to conform with
national requirements. Side Service: Equipped with
a tempered safety glass observation window.
3000 LIGHTING ASSEMBLY 92 energy efficient color
corrected fluorescent tubes, 23 horizontal light
fixtures, with four bulbs per fixture. The T8 light
fixtures contain an electronic ballast that complies
to the 2005 energy efficiency requirements and are
fitted with tempered glass. Interior accessible
fixtures are standard on the 3000 Series.
3000 BOOTH FILTRATION SYSTEM Pre-Filtration: Long
lasting washable pre-filters reduce contamination
of ceiling filters. Ceiling Filters: Filters are
rated at 99% efficiency on 10 micron particulate
and are held in position by steel knife edge closures.
Extract Filters: Standard fiberglass paint arrestor
fillers are utilized for maximum particulate removal.
3000 GRATES Fully galvanized grates and support
structure.
3000 ELECTRICAL SYSTEM All Garmart(r) USA products
are provided with a listed industrial electrical
control panel. All components are recognized, listed
or certified by UL, ETL, or CSA. All booths are
standard with a prewired control package for reduced
field installation time and costs.
3000 FIRE SUPPRESSION Booth is designed for addition
of fire suppression equipment (supplied by others).
Prewired for automatic shut down if required.
3000 MECHANICAL UNIT 12,000-18,000 CFM, variable
sheave belt drive, 10HP (15 HP optional) intake
and exhaust motors, reverse incline centrifugal
fans. 840,000, 1 Million or 1.5 Million BTU direct
fired burner, 80-90% recycle during bake, 25:1 turn-down
ratio for heat control.
3000 SPRAY CYCLE 100% outside air is drawn through
pre-filters, heated to recommended temperature,
passed through ceiling filters into the cabin, and
extracted through floor filters.
3000 BAKE CYCLE Fully automatic, including purge
and cool-down cycle. 10-20% fresh air is introduced
into cabin and exhausted through fiberglass filters
to the outside during the bake cycle. Cabin lights
turn off automatically during the bake cycle. Ouik-CureTM
Multi-Set Point temperature controller is an available
option.
3000 CONTROL PANEL Digital temperature controller,
safety interlocks - indicator lights, hour meter,
bake timer, cycle selector, state of the art programmable
logic controller offers precise control and diagnostic
capabilities of the operating systems, and photohelic
gauge, providing automatic pressure control, are
all standard features on this model series. A 50
ft. quick connect remote cable is supplied with
this unit.
GarmatĘ USA reserves the right to modify or change
any of the technical features mentioned here @2002
Garmat USA
